Discover the peace and quiet in boating
The Aquadrive antivibration system will help you, and your crew, enjoy the peace and quiet in boating. By isolating the engine from the rest of your boat, noise and vibration are greatly reduced. Most installations result in a 50% or more reduction in cabin or cockpit noise and vibration. Aquadrive will also help to keep your driveline in good condition by minimising wear and tear on the transmission and cutlass bearings.
Aquadrive antivibration system creates the necessary conditions for a smoother running, quiet boat.
The Aquadrive System
With Aquadrive the engine can be installed in a horizontal position using soft and efficient mounts. Apart from easy installation and permanent alignment, this also leads to better space utilisation while dramatically reducing vibration and noise.
In traditional installations, the alignment of the propeller shaft to the engine has to be precise and subject to periodical maintenance. Stiff mounts transmit high levels of vibration to the hull, even when perfectly aligned.
Outstanding technology to improve boats worldwide
A. Soft engine mounts isolate engine from hull.
B. Constant Velocity (CV) driveshaft absorbs engine vibration and eliminates need for accurate alignment.
C. Thrust unit on load bearing hull section reduces stress on transmission and engine mounts. Prop pushes boat, not engine.
ModuLine B10 Series
Aquadrive’s small-size engine couplings, for powers between 5 and 235 hp (3-170 kW).
Propeller shaft options for B10 standard version:
ØA = ¾”; 20 mm; 22 mm; 7/8″; 25 mm; 1″; 1 1/8″; 30 mm; 1¼”; 32 mm; 35 mm; 1½”; 40 mm
Propeller shaft options for B10 oversize version with external clamp mechanism:
ØA = 1¾”; 45 mm; 50 mm; 2″
CVB 05.10
Thrust bearing characteristics:
Max torque (ØA=20mm): 1034 Nm / 763 lbft
Max propeller shaft rev: 4000 rpm
Max prop. thrust: 11000 N / 2475 lbf
Optional shaft length:
Please note! CV 05 is not available in custom length. See CVB 10.10 instead.
CVB 10.10
Thrust bearing characteristics:
Max torque (ØA=1″): 1300 Nm / 969 lbft
Max propeller shaft rev: 4000 rpm
Max prop. thrust: 11000 N / 2475 lbf
Optional shaft length:
CV 10 driveshafts are available in lengths from 240 mm. Max length depending on shaft rpm.
CVB 15.10
Thrust bearing characteristics:
Max torque (ØA=1¼”): 1625 Nm / 1200 lbft
Max propeller shaft rev: 4000 rpm
Max prop. thrust: 11000 N / 2475 lbf
Optional shaft length:
CV 15 driveshafts are available in lengths from 270 mm. Max length depending on shaft rpm.
CVB 21.10
Thrust bearing characteristics:
Max torque (ØA=40mm): 2068 Nm / 1526 lbft
Max propeller shaft rev: 4000 rpm
Max prop. thrust: 11000 N / 2475 lbf
Optional shaft length:
CV 21 driveshafts are available in lengths from 280 mm. Max length depending on shaft rpm.
ModuLine B20 & B30 Series
The Aquadrive Moduline B20 and B30 series contain our mid-size systems for powers between 100–420 hp (73–310 kW).
Propeller shaft options for B20:
ØA = 40 mm ; 1¾”; 45 mm; 50 mm; 2″
Propeller shaft options for B30:
ØA = 40 mm; 1¾”; 45 mm; 50 mm; 2″; 2 ¼”; 60 mm; 2 ½”; 65 mm
All Moduline B20 and Moduline B30 units are available as flanged units.
CVB 21.20
Thrust bearing characteristics:
Max torque (ØA=2”): 1400 Nm
Max propeller shaft rev: 2000 rpm
Max prop. thrust: 14000 N
Optional shaft length:
CV 21 driveshafts are available in lengths from 280 mm. Max length depending on shaft rpm.
CVB 30.20
Thrust bearing characteristics:
Max torque (ØA=2”): 1400 Nm
Max propeller shaft rev: 2000 rpm
Max prop. thrust: 14000 N
Optional shaft length:
CV 30 driveshafts are available in lengths from 340 mm. Max length depending on shaft rpm.
CVB 32.30
Thrust bearing characteristics:
Max torque (ØA=65 mm): 3000 Nm
Max propeller shaft rev: 1700 rpm
Max prop. thrust: 21000 N
Optional shaft length:
CV 32 driveshafts are available in lengths from 424 mm. Max length depending on shaft rpm.
CVB 42.30
Thrust bearing characteristics:
Max torque (ØA=65 mm): 3000 Nm
Max propeller shaft rev: 1700 rpm
Max prop. thrust: 21000 N
Optional shaft length:
CV 42 driveshafts are available in lengths from 434 mm. Max length depending on shaft rpm.
Heavy Duty Line (HDL) Modules
Aquadrive HDL series is built to meet the high standards expected for ocean crossing and commercial crafts, suitable for engine powers between 400 to 1630 hp (300 to 1200 kW).
HDL 680 and 700 standard versions accept the following propeller shaft sizes:
ØA = 50 mm; 2″; 2 1/4″; 60 mm; 2 1/2″; 65 mm; 70 mm
HDL 42.680 / flanged
Thrust bearing characteristics:
Max torque: 10500 Nm /7750 lbft
Max propeller shaft rev: 1700 rpm
Max prop. thrust: 40000 N /9000 lbf
Optional shaft length:
CV 42 driveshafts are available in lengths from 434 mm. Max length depending on shaft rpm.
HDL 60.700 / flanged - HDL 60.700
Thrust bearing characteristics:
Max torque: 12240 Nm / 9060 lbft; *24400 Nm / 18060lbft
Max propeller shaft rev: 1700 rpm
Max prop. thrust: 40000 N / 9000 lbf
Optional shaft length:
CV 60 driveshafts are available in lengths from 700 mm. Max length depending on shaft rpm.
HDL 60.780 - HDL 60.780 HT*
Thrust bearing characteristics:
Max torque: 25000 Nm / 18500lbft; *24400 Nm / 18060lbft
Max propeller shaft rev: 1700 rpm
Max prop. thrust: 60000 N /13500 lbft
Optional shaft length:
CV 60 driveshafts are available in lengths from 700 mm. Max length depending on shaft rpm.